CompTIA Network+ N10-006 Q166

SIMULATION
You have been tasked with setting up a wireless network in an office. The network will consist of 3 access points and a single switch. The network must meet the following parameters.
The SSIDs need to be configured as corpnet with a key of S3cr3t!
The wireless signals should not interfere with each other
The subnet the Access points and Switch are on should only support 30 devices maximum
The access Points should be configured to only support TKIP clients at a maximum speed
Instructions: Click on the devices to review their information and adjust the setting of the APs to meet the given requirements.
q166-a

This simulation is still under construction. On the first exhibit, the layout should be as follows

Access Point Name AP1
IP Address 192.168.1.3
Gateway 192.168.1.2
SSID corpnet
SSID Broadcast yes

Mode G
Channel 1

Speed Auto
Duplex Auto

WPA

Passphrase S3cr3t!

Exhibit 2 as follows
Access Point Name AP2
IP Address 192.168.1.4
Gateway 192.168.1.2
SSID corpnet
SSID Broadcast yes

Mode G
Channel 6

Speed Auto
Duplex Auto

WPA
Passphrase S3cr3t!

Exhibit 3 as follows
Access Point Name AP3
IP Address 192.168.1.5
Gateway 192.168.1.2
SSID corpnet
SSID Broadcast yes

Mode G
Channel 11

Speed Auto
Duplex Auto

WPA
Passphrase S3cr3t!